Yes. Our MNS series low voltage switchgear follows the standard modular dimensions and structural design (E=25mm). The drawers, incoming/outgoing units, and busbar structures are fully compatible and interchangeable with standard market MNS configurations, making it ideal for system expansions or cost-effective project retrofits.
IP54 as standard — dust-tight and moisture-resistant. Works in factories, outdoors, and coastal environments. Powder-coated steel enclosure. No special upgrade required for harsh conditions. Need higher? We can configure for IP65 with gasketed doors and sealed cable entries.
Yes. Your logo, your color scheme, your nameplate. Multi-language documentation. NDA available if needed. One dedicated project manager handles everything from design review to pre-shipment inspection. No relay race between departments — just one person who knows your project.
CE as standard. We configure for destination market compliance — CCC, SASO, SNI, GOST, and others. IEC 61439-2 type-test reports ship with every panel. Need third-party testing at KEMA or ASTA? We arrange it. Test reports and material certificates are included — no extra paperwork fees.
4 to 6 weeks for standard configs. Custom voltages or non-standard dimensions add 2 to 3 weeks. We keep buffer stock for common ratings from 400A to 2500A. Factory capacity: 20,000 m², 200 people, 500-plus units per month.
Standard is 380V or 690V. We build for 220V residential up to 1000V industrial. Custom busbar cross-sections, non-standard phase arrangements, odd cabinet dimensions — all doable. Every panel is manufactured under ISO 9001. Send us your single-line diagram and we quote within 48 hours.
Switchgear handles higher fault currents — typically 50kA and up for our GGD series. A switchboard maxes out around 25kA. Switchgear compartments its sections for safety. Switchboards often share compartments. For anything driven by a 1000kVA or larger transformer, you want switchgear — not a switchboard.
Our GGD fixed switchgear panels are rated 65kA/1s short-circuit withstand. Each unit is type-tested to IEC 61439-2 at an accredited lab. The busbar is silver-plated copper with insulated supports rated for 20-plus years at full load. You get the type-test certificate with every order.
