Overview

    VS1-12(ZN63A) indoor high voltage vacuum circuit breaker is a three-phase AC 50 Hz indoor high voltage switchgear with rated voltage of 7.2-12kV. The circuit breaker meets the requirements of China's national standard gb1984-2003 "AC high voltage circuit breaker ", jb3855-1996 "3.6 ~ 40.5 kV indoor AC high voltage vacuum circuit breaker", d1403-91 "10-35 kV indoor high voltage vacuum circuit breaker ordering technical conditions" and relevant iec60694. IEC62271-100 standards, and has reliable interlocking function.

    VS1-12(ZN63A) indoor high voltage vacuum circuit breaker can be operated frequently and has the ability of multiple breaking, and fast reclosing.

    VS1-12(ZN63A) indoor high-voltage vacuum circuit breaker is designed as a front and back separate structure, which can be used as a fixed installation unit or as a separate handcart with a chassis car.

Working Conditons

1.Ambient temperature: - 15ºC-40ºC(daily average ≤35ºC)

2.Environmental humidity: daily average relative humidity s95%

3.Monthly average relative humidity ≤90%

4.Attitude: ≤1000M

5.Use environment: no dripping, fire, explosion, serious pollution, chemical corrosion and violent vibration

6.Seismic intensity: ≤8 degree

7.If the customer deviates from the normal use conditions, they can negotiate with the manufacturer for manufacturing

Types of meaning

Product structure drawing

Structure and function

1.Micro switch for switching between energy storage in place
2.Energy storage drive sprocket
3.Energy storage drive wheel
4.Energy storage to maintain the latch
5.Energy storage tension spring
6.Manual energy storage warm
7.Manual energy storage transmission worm gea
8.Motor drive sprocket
9.Energy storage motor
10.Interlocking drive bending
11.Drive chain
12.Locking electromagne
13.Locking electromagnet to lock the iron core
14.Energy storage holding shaft
15.Drive camshaft
16.Cam
17.Energy storage signs

1. Upper outlet block
2. Upper bracket
3. Vacuum interrupter
4. Insulating cylinde
5. Lower outiet block
6. Lower bracket
7. Insulated pull rod (with disc spring inside)
8. Transmission crank arm
9. Opening spring
10. Drive connecting plate
11. Spindle drive crank arm
12. Opening maintain the latch
13. Connecting plate
14. Opening release
15. Manual analysis ejector
16. Can
17. On-offindicator board

Main technical parameters