MerCs bsubar insulators are made from flame retardant fiberglass reinforced polyester and are stronger and hold closer tolerances than the traditional porcelain insulators. Our range of stand-off insulators isolates electrical conductors from mechanical mounting, preventing short circuits, Combine high mechanical strength with high arc resistance.
Another type of busbar insulator can ask for online service
Specification
Values
SM-25
SM-35
SM-40
SM-51
SM-76
Tensile Strenght [LBS]
500
600
800
1000
1500
Torque Strenght (FT LBS)
6
10
10
20
40
Voltage Withstand [KV]
8
10
10
15
25
Weight [g]
28
50
86
83
233
1.The contact box is formed by epoxy with APG techniques, it is used for insulation isolation and connection transition of various switch cabinets.
2. Altitude:≤1000m
3. Ambient temperature:+40ºC~10ºC
4. The relative humidity shall not be more than 95% at+20ºC ambient temperature.
5. NO gas, vapor or dust that may severely affect the insulation of the contact box, no explosive or corrosive substance.
6. The coper contact to earth shall withstand power frequency test voltage(effective value )of 42kv for 5 minutes and lightning impulse voltage (peak value)of 75KV.
7. The temperature of lead-out terminal shall not be more than 65ºC if the contact box is used for long time in rated current condition.
8. See the attached figure for the outline and installation dimension of contact box.
Another type of busbar insulator can ask for online service
Specification
Values
SM-25
SM-35
SM-40
SM-51
SM-76
Tensile Strenght [LBS]
500
600
800
1000
1500
Torque Strenght (FT LBS)
6
10
10
20
40
Voltage Withstand [KV]
8
10
10
15
25
Weight [g]
28
50
86
83
233
1.The contact box is formed by epoxy with APG techniques, it is used for insulation isolation and connection transition of various switch cabinets.
2. Altitude:≤1000m
3. Ambient temperature:+40ºC~10ºC
4. The relative humidity shall not be more than 95% at+20ºC ambient temperature.
5. NO gas, vapor or dust that may severely affect the insulation of the contact box, no explosive or corrosive substance.
6. The coper contact to earth shall withstand power frequency test voltage(effective value )of 42kv for 5 minutes and lightning impulse voltage (peak value)of 75KV.
7. The temperature of lead-out terminal shall not be more than 65ºC if the contact box is used for long time in rated current condition.
8. See the attached figure for the outline and installation dimension of contact box.
English 
